Toyota Tundra Service Manual: System Description

Toyota Tundra Service Manual / Power Source, Network / Multiplex Communication / Lin Communication System / System Description

SYSTEM DESCRIPTION

1. LIN COMMUNICATION SYSTEM DESCRIPTION

The LIN communication system is used for communication between the components below.
The LIN communication system has a component as a control master.

(a) Window and Sliding Roof Components that Use LIN Communication Bus (for CrewMax)

(1) Main Body ECU (Multiplex Network Body ECU)*1

(2) Power Window Regulator Master Switch Assembly*2

(3) Front Power Window Regulator Motor Assembly LH*2

(4) Front Power Window Regulator Motor Assembly RH*2

(5) Sliding Roof Drive Gear Sub-assembly (Sliding Roof ECU)*3

HINT:

*1: Control master
*2: for Power Window Control System (w/ Jam Protection Function)
*3: w/ Sliding Roof System

(b) Heater Components that Use LIN Communication

(1) Air Conditioning Amplifier Assembly*

HINT:

*: Control master

(2) Integration Air Conditioning Control Assembly

2. LIN COMMUNICATION SYSTEM DTCs

The control master component shown below outputs LIN communication system DTCs when there is a malfunction in the LIN communication. If a LIN communication stops, the control master of that part of the LIN communication system outputs DTCs.

(a) Main Body ECU (Multiplex Network Body ECU)

Problem Symptoms Table

System Diagram

See More:

Toyota Tundra Owners Manual > Operating the lights and wipers: Automatic High Beam
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead etc., and automatically turns the high beam on or off as necessary. WARNING■Limitations of the Automatic High Beam Do not rely on the Automatic High Beam. Always ...