Toyota Tundra Service Manual > Cylinder Head: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STUD BOLT (a) Using E7 and E8 "TORX" socket wrenches, install the stud bolts. Torque: for stud bolts A, B, C, D : 9.0 N·m {92 kgf·cm, 80 in·lbf} 2. INSTALL NO. 2 STRAIGHT SCREW PLUG (a) Using a 14 mm hexagon wrench, install 2 new gaskets and the 2 straight screw pl ...
