Toyota Tundra Service Manual: Operation Check

OPERATION CHECK

1. CHECK KEY REMINDER WARNING SYSTEM

(a) Check that the key reminder warning buzzer sounds.

(1) With the driver side door closed, insert the key into the ignition key cylinder and then turn the key to the LOCK or ACC position.

(2) Check that the buzzer sounds intermittently if the driver side door is opened.

(b) Check that the key reminder warning buzzer stops.

(1) Check that the buzzer stops sounding when any of the following operations is performed while the buzzer is sounding:

  • Close the driver side door (front door courtesy switch is off).
  • Turn the ignition switch to the ON position.
  • Remove the key from the ignition key cylinder.
    Key Reminder Buzzer does not Sound

    Parts Location

    See More:

    Toyota Tundra Service Manual > Transfer Assembly: Inspection
    INSPECTION PROCEDURE 1. INSPECT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY (FRONT) (a) Using a micrometer, measure the outer diameter of the output shaft companion flange sub-assembly (front) journal surface. Minimum Diameter: Journal Specified Condition A 34.962 mm (1.376 in.) B 39.955 mm (1.573 in ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0318