Toyota Tundra Owners Manual: Multi-information display

Display contents

The multi-information display presents the driver with a variety of vehicle data.

• Menu icons
  Displays the following information when an icon is selected.

  Some of the information may be displayed automatically depending on the situation.

Drive information

Select to display various drive data.

Navigation system-linked display

Select to display the following navigation system-linked information.

• Route guidance

• Compass display (north-up display/heading-up display)

Audio system-linked display

Select to enable selection of an audio source or track on the meter using the meter control switches.

Vehicle information

Select to display the operational status of the following systems:

• LDA (Lane Departure Alert)

• Dynamic radar cruise control

• Tire inflation pressure

• Trailer brake controller

Warning message display

Select to display warning messages and measures to be taken if a malfunction is detected.

Settings display

Select to change the meter display settings.

*: If equipped

■ Operating the meter control switches

1. Select an item/change pages
2. Press: Enters/Sets
   Press and hold: Resets
3. Switch menu/Displays the top screen
4. Returns to the previous screen

Drive information

• Total Average/Tank Average/Trip Average
  Displays the average fuel consumption since the function was reset, the vehicle was refueled, or the engine was started, respectively
  Use the displayed average fuel consumption as a reference.
• Range
  Displays the estimated maximum distance that can be driven with the quantity of fuel remaining, the distance driven after the engine was started or the distance since the function was reset, respectively.
  • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
  • When only a small amount of fuel is added to the tank, the display may not be updated.

    When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.

• Current
  Displays the current rate of fuel consumption
• Average Speed*/Trip Average Speed
  Displays the average since engine was started or the average since the function was reset, respectively
• Total Time*/Trip Time
  Displays the engine was started or the elapsed time since the function was reset, respectively
• Trip distance
  Displays the distance since the engine was started
• Digital speedometer
• Display off
  A blank screen is displayed

*: Resetting procedures:

• Select a function to be reset using the meter control switch and then press and hold the center button to reset.
• If there is more than one function that can be reset, check boxes will be displayed next to the functions.

Settings display

The settings of the following items can be changed.

For functions that can be enabled or disabled, the function switches between on and off each time is pressed.

• LDA (Lane Departure Alert)*1

  • LDA Sensitivity
    Select to set up the LDA (Lane Departure Alert) sensitivity.

  • Sway warning
    Select to enable/disable the Sway warning function.

  • Sway warning sensitivity
    Select to set up the sway warning sensitivity.

• PCS (Pre-Collision System)*1

  • PCS
    Select to enable/disable the PCS (Pre-Collision System) function.

  • Sensitivity
    Select to set up the PCS (Pre-Collision System) sensitivity.

• BSM (Blind Spot Monitor)*1
  Select to enable/disable the Blind Spot Monitor function.

• RCTA (Rear Cross Traffic Alert)*1
  Select to enable/disable the Rear Cross Traffic Alert function.

• Vehicle Settings

  • BSM Brightness*1
    Select to set up the BSM (Blind Spot Monitor) outside rear view mirror indicators brightness.

  • RCTA volume*1
    Select to set up the RCTA (Rear Cross Traffic Alert) warning buzzer volume.

  • TBC Trailer Type*1
    Select to set up the trailer brake type.

  • Maintenance reset*2
    Select to reset the message after the required maintenance is performed.

• Meter setting

  • Language
    Select to change the language on the display.

  • Units
    Select to change the unit of measure for fuel consumption and temperature.

  • Switch settings
    You can register 1 screen as the top screen. To register, press and hold while the desired screen is displayed.

    There are also screens that cannot be setup as the Top Screen.

  • Drive information 1 and 2
    Select to select up to 2 items that will be displayed on a Drive information screen, up to 2 Drive information screens can be set.

  • Pop-up display
    Select to set the following pop-up displays, which may appear in some situations, on/off.

    • Route guidance display of the navigation system-linked system (if equipped)

    • Incoming call display of the hands-free phone system

    • Instrument panel brightness adjustment display

  • Accent color
    Select to change the accent colors on the screen, such as the menu icon color.

  • Default settings
    Registered or changed meter settings will be deleted or returned to their default setting.

*1: If equipped
*2: For vehicles sold in the U.S.A.

■Setting items

• "Vehicle Settings" and "Meter Settings" setting items are not selectable during driving and cannot be operated.

  Also, the settings screen is temporarily canceled in the following situations.

  • When a warning message appears.

  • When the vehicle begins to move.

• Settings for functions not equipped to the vehicle are not displayed.

• When a function is turned off, the related settings for that function are not selectable.

■Pop-up display In some situations, such as when a switch operation is performed, a pop-up display will be temporarily displayed on the multi-information display.

■When disconnecting and reconnecting battery terminals The drive information will be reset.

■Trip summary display When the engine switch is turned off, each of the following will be displayed on the multi-information display, and will clear after approximately 30 seconds.

• Distance traveled

• Average fuel consumption

• Driving range

■Tire inflation pressure

• It may take a few minutes to display the tire inflation pressure after the engine switch is turned to the "ON" position. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted.

• "---" may be displayed if the tire position information cannot be determined due to unfavorable radio wave conditions.

• Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.

■Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.