Toyota Tundra Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SEAT CUSHION SHIELD WIRE LH

2. INSTALL FRONT SEAT CUSHION SHIELD WIRE RH (for Front Passenger Side)

3. INSTALL UPPER NO. 4 SEAT TRACK COVER

4. INSTALL UPPER NO. 3 SEAT TRACK COVER

HINT:

Use the same procedure described for the upper No. 4 seat track cover.

5. INSTALL UPPER SEAT TRACK COVER

6. INSTALL FRONT LOWER SEAT CUSHION SHIELD LH (for Driver Side)

7. INSTALL FRONT LOWER SEAT CUSHION SHIELD RH (for Driver Side)

HINT:

Use the same procedure described for the LH side.

8. INSTALL FRONT LOWER SEAT CUSHION SHIELD LH (for Front Passenger Side)

9. INSTALL FRONT LOWER SEAT CUSHION SHIELD RH (for Front Passenger Side)

HINT:

Use the same procedure described for the LH side.

10. INSTALL FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH

(a) Attach the 4 hooks of the rear side to install the separate type front seat cushion spring assembly to the front seat cushion frame sub-assembly LH.

(b) Attach the hook of the front side.

11. INSTALL FRONT SEAT CUSHION PANEL SUB-ASSEMBLY

(a) Install the front seat cushion panel sub-assembly with the 4 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

12. INSTALL FRONT SEAT CUSHION WIRE LH (for Driver Side)

13. INSTALL FRONT SEAT CUSHION WIRE RH (for Front Passenger Side)

14. INSTALL SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)

15. INSTALL SEAT CUSHION CLIMATE CONTROL DUCT LH (w/ Climate Control Seat System)

16. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)

17. INSTALL OCCUPANT CLASSIFICATION ECU (for Front Passenger Side)

18. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

19. INSTALL FRONT SEATBACK FRAME SUB-ASSEMBLY LH

(a) Attach the 2 guides and 2 clips to install the lumbar support adjuster assembly LH to the front seatback frame sub-assembly LH.

20. INSTALL SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)

21. INSTALL FRONT SEATBACK WIRE LH (for Driver Side)

22. INSTALL FRONT SEATBACK WIRE RH (for Front Passenger Side)

23. INSTALL FRONT SEAT AIRBAG ASSEMBLY LH

24. INSTALL SEPARATE TYPE FRONT SEATBACK PAD

25. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

26. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

27. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

28. INSTALL FRONT SEAT CUSHION SHIELD LH

29. INSTALL SEAT POSITION AIRBAG SENSOR

30. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

31. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

32. INSTALL FRONT SEAT ASSEMBLY

(See page )

33. CHECK SRS WARNING LIGHT

(See page )

34. INSPECT FRONT SEAT ASSEMBLY

(a) w/o Seat Position Memory System:

(See page )

(b) w/ Seat Position Memory System:

(See page )

35. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

(See page )

36. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

(See page )

    Inspection

    On-vehicle Inspection

    See More:

    Toyota Tundra Service Manual > Can Communication System: Check Bus 1 Line for Short to GND
    DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 23 (CA1H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 8 (CA1L) of the central gateway ECU (network gateway ECU) and termina ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0288