INSTALLATION PROCEDURE 1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 7 Speakers) (a) Connect the connector. (b) Temporarily install the front No. 4 speaker assembly by aligning the positioning pins of the front No. 4 speaker assembly with the instrument panel. (c) Install the front No. 4 speaker assembly with the 2 bolts. Torque: 3.5 N·m {36 kgf·cm, 31 in·lbf} NOTICE:
2. INSTALL NO. 1 SPEAKER HOLE COVER (a) Attach the 8 clips to install the No. 1 speaker hole cover. 3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH (a) Connect the connector. (b) Temporarily install the front No. 2 speaker assembly RH by aligning the positioning pins of the front No. 2 speaker assembly RH with the instrument panel. (c) Install the front No. 2 speaker assembly RH with the 2 bolts. Torque: 3.5 N·m {36 kgf·cm, 31 in·lbf} NOTICE:
4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH (a) Connect the connector. (b) Temporarily install the front No. 2 speaker assembly LH by aligning the positioning pins of the front No. 2 speaker assembly LH with the instrument panel. (c) Install the front No. 2 speaker assembly LH with the 2 bolts. Torque: 3.5 N·m {36 kgf·cm, 31 in·lbf} NOTICE:
5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (a) Attach the 2 guides, 3 clips and 3 claws to install the No. 2 instrument panel speaker panel sub-assembly. 6. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (a) Attach the 2 guides, 3 clips and 3 claws to install the No. 1 instrument panel speaker panel sub-assembly. 7. INSTALL FRONT PILLAR GARNISH RH
8. INSTALL FRONT PILLAR GARNISH LH
|
Toyota Tundra Service Manual > Front Door(for Crewmax): Adjustment
ADJUSTMENT CAUTION / NOTICE / HINT HINT: Before adjusting the door position for vehicles equipped with side airbags and curtain shield airbags, be sure to disconnect the battery. After adjustment, inspect the SRS warning light and check for DTC (see page ). Use the same procedures for the RH side an ...