Toyota Tundra Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

HINT:

  • When DTC B1650/23 is detected as a result of troubleshooting the airbag system, troubleshoot the occupant classification system.
  • Use the Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.

(e) Erase the DTCs.

    Diagnostic Trouble Code Chart

    How To Proceed With Troubleshooting

    See More:

    Toyota Tundra Service Manual > Pre-collision System: Yaw Rate Sensor (C1A46)
    DESCRIPTION If the millimeter wave radar sensor assembly receives a yaw rate sensor malfunction signal from the yaw rate sensor (airbag sensor assembly) or yaw rate sensor zero point malfunction signal from the skid control ECU (brake actuator assembly), DTC C1A46 will be stored. DTC No. Detection I ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.028