FAIL-SAFE CHART 1. POWER WINDOW OPERATION IN FAIL-SAFE MODE HINT: If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode. (a) The power window control system prohibits the following power window operation when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal. Power Window Control System
HINT: When the pulse sensor is normal, the AUTO UP/DOWN function can be resumed by deactivating fail-safe mode. To deactivate fail-safe mode, pull up the power window switch to the AUTO UP position and hold it for at least 1 second to fully close the window from the fully open position. (b) If the LIN communication line malfunctions (communication stop), the power window control system prohibits the following operations. Master Switch
HINT: Remote up/down function does not operate. Power Window Regulator Switch (for Front Passenger Side)
|
Toyota Tundra Service Manual > Front Upper Suspension Arm: Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side. PROCEDURE 1. REMOVE FRONT WHEEL 2. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING LH (a) Remove the front shock absorber with coil spring (see page ). 3. DISCONNE ...
