DESCRIPTION
- When the front doors are closed and the ignition switch is turned from ON
to OFF, each power window regulator motor can control its power window operation
for approximately 43 +/-1.5 seconds by receiving operation permission signals
from the main body ECU (multiplex network body ECU). However, when approximately
43 +/-1.5 seconds have elapsed, or the driver side door or front passenger side
door is opened within approximately 43 +/-1.5 seconds after turning the ignition
switch off, the power window regulator motor stops operating.
- During the AUTO DOWN function operation, when 43 +/-1.5 seconds have passed
and the key-off operation is prohibited, the window operation stops immediately.
- The front passenger side power window and rear power windows cannot be operated
when the window lock switch is pressed.
WIRING DIAGRAM
PROCEDURE
|
1.
|
CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF
|
(a) Check the power window operation function after the ignition switch is turned
OFF.
Result:
|
Result
|
Proceed to
|
|
Front side door is opened within 43 +/-1.5 seconds but power window can
still operate
|
A
|
|
43 +/-1.5 seconds pass and power windows can still operate
|
B
|
| B |
 |
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
|
| A |
|
|
|
2.
|
READ VALUE USING TECHSTREAM (DOOR COURTESY SWITCH)
|
(a) Use the Data List to check if the main body ECU (multiplex network body ECU)
is functioning properly.
Main Body:
|
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
|
D Door Courtesy SW
|
Driver side door courtesy switch signal / ON or OFF
|
ON: Driver door open
OFF: Driver door closed
|
-
|
|
P Door Courtesy SW
|
Front passenger side door courtesy switch signal / ON or OFF
|
ON: Front passenger door open
OFF: Front passenger door closed
|
-
|
OK:
Tester display changes normally when door courtesy switch is operated.
| OK |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
|
| NG |
|
GO TO LIGHTING SYSTEM
|
|
