Toyota Tundra Service Manual: System Description

Toyota Tundra Service Manual / Vehicle Interior / Window / Glass / Windshield Deicer System / System Description

SYSTEM DESCRIPTION

1. GENERAL

The windshield deicer system's thin heater wires are attached to the inside of the windshield glass and deice the windshield surface quickly. The indicator light illuminates while the system is operating. The system automatically turns off after approximately 15 minutes.

The windshield deicer switch is built into the mirror heater switch.

2. FUNCTION OF MAIN COMPONENT

Component

Outline

Air conditioning control assembly (windshield deicer switch)

Located on air conditioning control assembly, detects windshield deicer switch operation and transmits signals to air conditioning amplifier through LIN communication line

Windshield deicer relay assembly

Receives windshield deicer activation request signals from air conditioning amplifier and supplies power to windshield deicer

Windshield glass (windshield deicer wire)

Receives power from windshield deicer relay assembly and heats windshield glass (windshield deicer wire)

3. DESCRIPTION

Function

Outline

Windshield surface deicer
  • Windshield deicer relay assembly receives windshield deicer activation request signals from air conditioning amplifier and supplies power to windshield deicer
  • Receives power from windshield deicer relay assembly and heats windshield glass (windshield deicer wire)
    Problem Symptoms Table

    System Diagram

    See More:

    Toyota Tundra Service Manual > Oil Pump: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL FRONT OIL PUMP OIL SEAL (a) Using SST and a hammer, tap in a new oil seal. SST: 09350-30020 09351-32140 HINT: The oil seal end should be flush with the outer edge of the pump body. (b) Coat the lip of the oil seal with MP grease. 2. FIX FRONT OIL PUMP BODY SUB-ASSEMBL ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0094