Toyota Tundra Service Manual: Speaker Output Short (B15C3)

Toyota Tundra Service Manual / Audio, Visual, Telematics / Navigation / Multi Info Display / Navigation System / Speaker Output Short (B15C3)

DESCRIPTION

This DTC is stored when a malfunction occurs in the speakers.

DTC Code	DTC Detection Condition	Trouble Area
B15C3	A short is detected in the speaker output circuit.	Speakers Harness or connector Stereo component amplifier assembly Navigation receiver assembly

WIRING DIAGRAM

PROCEDURE

1.	CHECK FOR DTC

(a) Clear the DTCs (See page ).

(b) Check for DTCs (See page ).

OK:

No DTCs are output.

USE SIMULATION METHOD TO CHECK

2.	CHECK VEHICLE CONDITION

(a) Check the vehicle condition.

Result

Result	Proceed to
for 7 or 9 Speakers	A
for 12 Speakers	B

GO TO STEP 10

3.	CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

*1: for RH Side
*2: for LH Side
*3: for 9 Speakers

(a) Disconnect the J133 and J134 navigation receiver assembly connector.

(b) Disconnect the M8*1 and/or N10*2 front No. 1 speaker assembly connector.

(d) Disconnect the J150 front No. 4 speaker assembly connector.

(e) Disconnect the O1*1 and/or O7*2 rear No. 1 speaker assembly connector.

(f) Disconnect the O2*1 and/or O8*2 rear No. 2 speaker assembly connector.*3

(g) Disconnect the J144 and J145 stereo component amplifier assembly connectors.

(h) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
M8-1 - J144-1 (R+)	Always	Below 1 Ω
M8-2 - J144-5 (R-)	Always	Below 1 Ω
N10-1 - J144-2 (L+)	Always	Below 1 Ω
N10-2 - J144-6 (L-)	Always	Below 1 Ω
O1-1 - J145-4 (WFR+)	Always	Below 1 Ω
O1-2 - J145-11 (WFR-)	Always	Below 1 Ω
O7-1 - J145-5 (WFL+)	Always	Below 1 Ω
O7-2 - J145-12 (WFL-)	Always	Below 1 Ω
O2-3 - J145-9 (RR+)*3	Always	Below 1 Ω
O2-2 - J145-10 (RR-)*3	Always	Below 1 Ω
J145-9 (RR+) - J134-1 (RR+)	Always	Below 1 Ω
J145-10 (RR-) - J134-3 (RR-)	Always	Below 1 Ω
O8-3 - J145-3 (RL+)*3	Always	Below 1 Ω
O8-2 - J145-8 (RL-)*3	Always	Below 1 Ω
J145-3 (RL+) - J134-2 (RL+)	Always	Below 1 Ω
J145-8 (RL-) - J134-6 (RL-)	Always	Below 1 Ω
J145-2 (FR+) - J133-1 (FR+)	Always	Below 1 Ω
J145-7 (FR-) - J133-5 (FR-)	Always	Below 1 Ω
J145-1 (FL+) - J133-2 (FL+)	Always	Below 1 Ω
J145-6 (FL-) - J133-6 (FL-)	Always	Below 1 Ω
J145-2 (FR+) - J147-3 (TWR+)	Always	Below 1 Ω
J145-7 (FR-) - J147-2 (TWR-)	Always	Below 1 Ω
J145-1 (FL+) - J149-3 (TWL+)	Always	Below 1 Ω
J145-6 (FL-) - J149-2 (TWL-)	Always	Below 1 Ω
J147-1 (+) - J150-1 (+)	Always	Below 1 Ω
J147-4 (-) - J150-4 (RI1-)	Always	Below 1 Ω
J150-2 (-) - J149-4 (-)	Always	Below 1 Ω
J150-3 (RI1+) - J149-1 (+)	Always	Below 1 Ω
J144-1 (R+) - Body ground	Always	10 kΩ or higher
J144-5 (R-) - Body ground	Always	10 kΩ or higher
J144-2 (L+) - Body ground	Always	10 kΩ or higher
J144-6 (L-) - Body ground	Always	10 kΩ or higher
J145-4 (WFR+) - Body ground	Always	10 kΩ or higher
J145-11 (WFR-) - Body ground	Always	10 kΩ or higher
J145-5 (WFL+) - Body ground	Always	10 kΩ or higher
J145-12 (WFL-) - Body ground	Always	10 kΩ or higher
J145-9 (RR+) - Body ground	Always	10 kΩ or higher
J145-10 (RR-) - Body ground	Always	10 kΩ or higher
J145-3 (RL+) - Body ground	Always	10 kΩ or higher
J145-8 (RL-) - Body ground	Always	10 kΩ or higher
J145-2 (FR+) - Body ground	Always	10 kΩ or higher
J145-7 (FR-) - Body ground	Always	10 kΩ or higher
J145-1 (FL+) - Body ground	Always	10 kΩ or higher
J145-6 (FL-) - Body ground	Always	10 kΩ or higher
J147-1 (+) - Body ground	Always	10 kΩ or higher
J147-4 (-) - Body ground	Always	10 kΩ or higher
J147-3 (TWR+) - Body ground	Always	10 kΩ or higher
J147-2 (TWR-) - Body ground	Always	10 kΩ or higher
J150-2 (-) - Body ground	Always	10 kΩ or higher
J150-3 (RI1+) - Body ground	Always	10 kΩ or higher
J149-3 (TWL+) - Body ground	Always	10 kΩ or higher
J149-2 (TWL-) - Body ground	Always	10 kΩ or higher

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.	INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

(a) Remove the front No. 1 speaker assembly.

for Double Cab: See page
for CrewMax: See page

(b) Inspect the front No. 1 speaker assembly.

for Double Cab: See page
for CrewMax: See page

Result

Result	Proceed to
OK	A
NG (for Double Cab)	B
NG (for CrewMax)	C

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

5.	CHECK FRONT NO. 2 SPEAKER ASSEMBLY

(a) Replace the front No. 2 speaker assembly with a known good one.

for Double Cab: See page
for CrewMax: See page

(b) Check that the malfunction disappears.

NOTICE:

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.
Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.
Perform the above inspection on both LH and RH sides.

OK:

Malfunction disappears.

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

6.	CHECK FRONT NO. 4 SPEAKER ASSEMBLY

(a) Replace the front No. 4 speaker assembly with a known good one.

for Double Cab: See page
for CrewMax: See page

(b) Check that the malfunction disappears.

OK:

Malfunction disappears.

END (FRONT NO. 4 SPEAKER ASSEMBLY IS DEFECTIVE)

7.	INSPECT REAR NO. 1 SPEAKER ASSEMBLY

(a) Remove the rear No. 1 speaker assembly with a known good one.

for Double Cab: See page
for CrewMax: See page

(b) Inspect the rear No. 1 speaker assembly with a known good one.

for Double Cab: See page
for CrewMax: See page

Result

Result	Proceed to
OK (for CrewMax)	A
OK (for Double Cab)	B
NG (for Double Cab)	C
NG (for CrewMax)	D

GO TO STEP 9

REPLACE REAR NO. 1 SPEAKER ASSEMBLY

8.	CHECK REAR NO. 2 SPEAKER ASSEMBLY

(a) Replace the rear No. 2 speaker assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

NOTICE:

Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.
Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.
Perform the above inspection on both LH and RH sides.

OK:

Malfunction disappears.

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

9.	CHECK STEREO COMPONENT AMPLIFIER ASSEMBLY

(a) Replace the stereo component amplifier assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

OK:

Malfunction disappears.

Result

Result	Proceed to
OK	A
NG (for Columu Shift Type)	B
NG (for Floor Shift Type)	C

END (STEREO COMPONENT AMPLIFIER ASSEMBLY IS DEFECTIVE)

REPLACE NAVIGATION RECEIVER ASSEMBLY

10.	CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

*1: for RH Side
*2: for LH Side

(a) Disconnect the M8*1 and/or N10*2 front No. 1 speaker assembly connector.

(b) Disconnect the J146*1 and/or J148*2 front No. 2 speaker assembly connector.

(d) Disconnect the J150 front No. 4 speaker assembly connector.

(e) Disconnect the O1*1 and/or O7*2 rear No. 1 speaker assembly connector.

(f) Disconnect the O2*1 and/or O8*2 rear No. 2 speaker assembly connector.

(g) Disconnect the P14 No. 1 box speaker assembly connector.

(h) Disconnect the J142 and J143 stereo component amplifier assembly connectors.

(i) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
J142-2 (FR+) - J146-3 (TWR+)	Always	Below 1 Ω
J142-6 (FR-) - J146-4 (TWR-)	Always	Below 1 Ω
J146-1 (+) - M1-3	Always	Below 1 Ω
J146-2 (-) - M1-2	Always	Below 1 Ω
J143-9 (WFR+) - M8-1	Always	Below 1 Ω
J143-3 (WFR-) - M8-2	Always	Below 1 Ω
J142-10 (RR+) - O2-3 (+TW)	Always	Below 1 Ω
J142-4 (RR-) - O2-2 (-TW)	Always	Below 1 Ω
O2-4 (+) - O1-1	Always	Below 1 Ω
O2-1 (-) - O1-2	Always	Below 1 Ω
J143-5 (WF1+) - P14-1	Always	Below 1 Ω
J143-12 (WF1-) - P14-2	Always	Below 1 Ω
J142-3 (RL+) - O8-3 (+TW)	Always	Below 1 Ω
J142-9 (RL-) - O8-2 (-TW)	Always	Below 1 Ω
O8-4 (+) - O7-1	Always	Below 1 Ω
O8-1 (-) - O7-2	Always	Below 1 Ω
J143-2 (WFL+) - N10-1	Always	Below 1 Ω
J143-1 (WFL-) - N10-2	Always	Below 1 Ω
J142-8 (FL+) - J148-3 (TWL+)	Always	Below 1 Ω
J142-7 (FL-) - J148-4 (TWL-)	Always	Below 1 Ω
J148-1 (+) - N1-3	Always	Below 1 Ω
J148-2 (-) - N1-2	Always	Below 1 Ω
J143-4 (CTR+) - J150-1	Always	Below 1 Ω
J143-10 (CTR-) - J150-2	Always	Below 1 Ω
J142-2 (FR+) - Body ground	Always	10 kΩ or higher
J142-6 (FR-) - Body ground	Always	10 kΩ or higher
J146-1 (+) - Body ground	Always	10 kΩ or higher
J146-2 (-) - Body ground	Always	10 kΩ or higher
J143-9 (WFR+) - Body ground	Always	10 kΩ or higher
J143-3 (WFR-) - Body ground	Always	10 kΩ or higher
J142-10 (RR+) - Body ground	Always	10 kΩ or higher
J142-4 (RR-) - Body ground	Always	10 kΩ or higher
O2-4 (+) - Body ground	Always	10 kΩ or higher
O2-1 (-) - Body ground	Always	10 kΩ or higher
J143-5 (WF1+) - Body ground	Always	10 kΩ or higher
J143-12 (WF1-) - Body ground	Always	10 kΩ or higher
J142-3 (RL+) - Body ground	Always	10 kΩ or higher
J142-9 (RL-) - Body ground	Always	10 kΩ or higher
O8-4 (+) - Body ground	Always	10 kΩ or higher
O8-1 (-) - Body ground	Always	10 kΩ or higher
J143-2 (WFL+) - Body ground	Always	10 kΩ or higher
J143-1 (WFL-) - Body ground	Always	10 kΩ or higher
J142-8 (FL+) - Body ground	Always	10 kΩ or higher
J142-7 (FL-) - Body ground	Always	10 kΩ or higher
J148-1 (+) - Body ground	Always	10 kΩ or higher
J148-2 (-) - Body ground	Always	10 kΩ or higher
J143-4 (CTR+) - Body ground	Always	10 kΩ or higher
J143-10 (CTR-) - Body ground	Always	10 kΩ or higher

REPAIR OR REPLACE HARNESS OR CONNECTOR

11.	INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

(a) Remove the front No. 1 speaker assembly (See page ).

(b) Inspect the front No. 1 speaker assembly (See page ).

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

12.	CHECK FRONT NO. 2 SPEAKER ASSEMBLY

(a) Replace the front No. 2 speaker assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

NOTICE:

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.
Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.
Perform the above inspection on both LH and RH sides.

OK:

Malfunction disappears.

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

13.	CHECK FRONT NO. 4 SPEAKER ASSEMBLY

(a) Replace the front No. 4 speaker assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

OK:

Malfunction disappears.

END (FRONT NO. 4 SPEAKER ASSEMBLY IS DEFECTIVE)

14.	CHECK FRONT NO. 3 SPEAKER ASSEMBLY

(a) Replace the front No. 3 speaker assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

NOTICE:

Connect all the connectors to the front No. 3 speaker assemblies that were disconnected.
Connect all the connectors to the front No. 3 speaker assemblies that were disconnected.
Perform the above inspection on both LH and RH sides.

OK:

Malfunction disappears.

END (FRONT NO. 3 SPEAKER ASSEMBLY IS DEFECTIVE)

15.	INSPECT NO. 1 BOX SPEAKER ASSEMBLY

(a) Remove the No. 1 box speaker assembly (See page ).

(b) Inspect the No. 1 box speaker assembly (See page ).

REPLACE NO. 1 BOX SPEAKER ASSEMBLY

16.	INSPECT REAR NO. 1 SPEAKER ASSEMBLY

(a) Remove the rear No. 1 speaker assembly (See page ).

(b) Inspect the rear speaker assembly (See page ).

REPLACE REAR NO. 1 SPEAKER ASSEMBLY

17.	CHECK REAR NO. 2 SPEAKER ASSEMBLY

(a) Replace the rear No. 2 speaker assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

NOTICE:

Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.
Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.
Perform the above inspection on both LH and RH sides.

OK:

Malfunction disappears.

END (REAR NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

18.	CHECK STEREO COMPONENT AMPLIFIER ASSEMBLY

(a) Replace the stereo component amplifier assembly with a known good one (See page ).

(b) Check that the malfunction disappears.

OK:

Malfunction disappears.

Result

Result	Proceed to
OK	A
NG (for Column Shift Type)	B
NG (for Floor Shift Type)	C

END (STEREO COMPONENT AMPLIFIER ASSEMBLY IS DEFECTIVE)

REPLACE NAVIGATION RECEIVER ASSEMBLY

Speed Signal Malfunction (B15C2)

Stereo Component Amplifier Disconnected (B15D3)

See More:

Toyota Tundra Service Manual > Vehicle Stability Control System: Error in Matching of ECUs (C1288)
DESCRIPTION The skid control ECU (brake actuator assembly) stores this DTC when the previously learned values in the VSC system and engine information sent from the ECM are inconsistent, or when the learning has not completed after the skid control ECU (brake actuator assembly) is replaced with a ne ...

Toyota Tundra Service Manual: Speaker Output Short (B15C3)

Speed Signal Malfunction (B15C2)

Stereo Component Amplifier Disconnected (B15D3)

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual