PROCEDURE |
1. | CHECK IF A PROPER DISC IS INSERTED |
(a)
Make sure that the disc is an audio disc or a disc with an MP3, WMA or
AAC file, and that it is not deformed, flawed, stained, deteriorated or
otherwise defective. OK: Disc is normal.
HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CDs with adhesive paper labels should not be played.
- Commercial audio CDs can be played.
- CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
- MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.
- For details on playable CDs, refer to the Owner's Manual.
| NG |
 | CHANGE DISC |
|
OK |
 | |
| 2. |
CHECK THAT DISC IS INSERTED PROPERLY | (a) Check if the disc is inserted upside down.
OK: The disc is properly inserted.
| NG |
| INSERT DISC PROPERLY |
|
OK | |
| |
| (a) Disc cleaning (1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
OK: Malfunction disappears. NOTICE: Do not use a conventional record cleaner or antistatic preservative. |
|
| OK |
| END (DISC IS DIRTY) |
|
NG | |
| |
| 4. |
REPLACE DISC WITH ANOTHER AND RECHECK |
(a) Replace the disc with a known good one and check that the malfunction disappears.
OK: Malfunction disappears. Result |
Result | Proceed to | |
OK | A | |
NG (for Column Shift Type) |
B | | NG (for Floor Shift Type) |
C |
| A |
| END (DISC IS DEFECTIVE) |
| B |
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
| C |
| REPLACE NAVIGATION RECEIVER ASSEMBLY | |
