REASSEMBLY PROCEDURE 1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY (a) Using a T30 "TORX" wrench, install the actuator bracket with the 3 screws. Torque: 9.5 N·m {97 kgf·cm, 84 in·lbf} |
Toyota Tundra Service Manual > Engine: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT IGNITION TIMING (a) Warm up and stop the engine. (1) Allow the engine to warm up to a normal operating temperature. (b) When using the Techstream: (1) Connect the Techstream to the DLC3. (2) Start the engine and idle it. (3) Turn the Techstream main switch ...
