If there is a problem with the hands-free system or a Bluetooth
device, first check the table below.
When using the hands-free system with a Bluetooth device
| The hands-free system or Bluetooth device does not work. |
| The connected device may not be a compatible Bluetooth
cellular phone.
→ For a list of specific
devices which operation has been confirmed
on this system, check with your Toyota dealer or the following
website:
http://www.toyota.com/bluetooth |
| The Bluetooth version of the connected cellular phone may be
older than
the specified version.
→ Use a cellular phone with
Bluetooth version 2.0 or higher (recommended:
Ver. 3.0 with EDR or higher). |
When registering/connecting a cellular phone
| A cellular phone cannot be registered. |
| An incorrect passcode was entered on the cellular phone.
→ Enter the correct passcode
on the cellular phone. |
| The registration operation has not been completed on the
cellular phone
side.
→ Complete the registration
operation on the cellular phone (approve
registration on the phone). |
| Old registration information remains on either this system
or the cellular
phone.
→ Delete the existing
registration information from both this system
and the cellular phone, then register the cellular phone you
wish to
connect to this system. |
| A Bluetooth connection cannot be made. |
| Another Bluetooth device is already connected.
→ Manually connect the
cellular phone you wish to use to this system. |
| Bluetooth function is not enabled on the cellular phone.
→ Enable the Bluetooth
function on the cellular phone. |
| "Please check your device settings." message is
displayed. |
| Bluetooth function is not enabled on the cellular phone.
→ Enable the Bluetooth
function on the cellular phone. |
| Old registration information remains on either this system
or the cellular
phone.
→ Delete the existing
registration information from both this system
and the cellular phone, then register the cellular phone you
wish to
connect to this system. |
When making/receiving a call
| A call cannot be made/received. |
| Your vehicle is in a out of cellular service area.
→ Move to where "Out
of cellular service area. Please try again later."
no longer appears on the display. |
When using the contacts
| Contact data cannot be transferred
manually/automatically. |
| The profile version of the connected cellular phone may not
be compatible
with transferring contact data.
→ For a list of specific
devices which operation has been confirmed
on this system, check with your Toyota dealer or the following
website:
http://www.toyota.com/bluetooth |
| Automatic contact transfer function on this system is set to
off.
→ Set automatic contact
transfer function on this system to on. |
| Passcode has not been entered on the cellular phone.
→ Enter the passcode on the
cellular phone if requested (default passcode:
1234). |
| Transfer operation on the cellular phone has not completed.
→ Complete transfer
operation on the cellular phone (approve transfer
operation on the phone). |
| Contact data cannot be edited. |
| Automatic contact transfer function on this system is set to
on.
→ Set automatic contact
transfer function on this system to off. |
When using the Bluetooth message function
| Messages cannot be viewed. |
| Message transfer is not enabled on the cellular phone.
→ Enable message transfer on
the cellular phone (approve message
transfer on the phone). |
| Automatic transfer function on this system is set to off.
→ Set automatic transfer
function on this system to on. |
| New message notifications are not displayed. |
| Notification of SMS/MMS/E-mail reception on this system is
set to off.
→ Set notification of SMS/MMS/E-mail
reception on this system to on. |
| Automatic message transfer function is not enabled on the
cellular phone.
→ Enable automatic transfer
function on the cellular phone. |
In other situations
| Even though all conceivable measures have been taken, the
symptom status
does not change. |
| The cellular phone is not close enough to this system.
→ Bring the cellular phone
closer to this system. |
| The cellular phone is the most likely cause of the symptom.
→ Turn the cellular phone
off, remove and reinstall the battery pack,
and then restart the cellular phone.
→ Enable the cellular
phone's Bluetooth connection.
→ Stop the cellular phone's
security software and close all applications.
→ Before using an
application installed on the cellular phone, carefully
check its source and how its operation might affect this system. |
|
