|
DTC Code | Detection Item |
DTC Detection Condition | See page |
|
B2603 | Tilt and Telescopic Manual Switch Circuit Malfunction |
When
operating the tilt and telescopic switch (headlight dimmer switch
assembly), an abnormal voltage value is sent to the multiplex tilt and
telescopic ECU. |
 |
|
B2610 | Tilt Position Sensor or Tilt Motor Circuit Malfunction |
Tilt operation stops within the operation range while operating. |
|
|
B2611 | Telescopic Position Sensor or Telescopic Motor Circuit Malfunction |
Telescopic operation stops within the operation range while operating. |
|
|
B2620 | ECU Power Source Circuit Malfunction |
The voltage of the ECU power source drops to 8 V or less and this condition continues for 10 seconds or more. |
|
|
B2624 | Vehicles Speed Malfunction |
- The auto away function is disabled with the last vehicle speed signal
(If the ignition switch is turned off immediately after the vehicle
comes to a sudden stop, the last vehicle speed signal may not be 0 km/h
(0 mph).) of 10 km/h (6 mph) or more.
- The vehicle speed signal is lost for 5 seconds or more and the auto away/return function is disabled.
|
|
|
U0142 | Lost Communication with Main Body ECU |
Lost communication with main body ECU (multiplex network body ECU) |
|
|
U0208 | Lost Communication with "Seat Control Module A" |
Lost communication with front power seat switch LH |
|
