Toyota Tundra Service Manual: Reassembly

Toyota Tundra Service Manual / Vehicle Interior / Lighting / Headlight Assembly(for Led Headlight) / Reassembly

REASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SIDE MARKER LIGHT BULB

(a) Install the front side marker light bulb to the front side marker light bulb socket.

(b) Turn the front side marker light bulb socket in the direction indicated by the arrow to install it.

2. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Install the front turn signal light bulb to the front turn signal light bulb socket.

(b) Turn the front turn signal light bulb socket in the direction indicated by the arrow to install it.
    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Short to GND or Open in Buzzer (C1ABE)
    DESCRIPTION DTC C1ABE is stored when the blind spot monitor sensor LH detects a short to ground or open in the RCTA buzzer (blind spot monitor buzzer) circuit. DTC No. DTC Detection Condition Trouble Area C1ABE Both of the following conditions are met: The blind spot monitor system is on The blind s ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.011