DESCRIPTION Front passenger side: When the ignition switch is ON and the window lock switch is OFF, the master switch sends remote UP/DOWN signals to the front passenger side motor via the LIN communication line. Rear side: With the ignition switch ON, the master switch transmits remote switch signals to the regulator switches of the rear door power windows. Then, each regulator switch drives its respective power window regulator motor. HINT: The front passenger side and rear power windows cannot be operated when the window lock switch of the master switch is pressed. PROCEDURE
(a) Check for LIN communication system DTCs related to the power window control system (See page ). OK: LIN communication system DTCs are not output.
(a) Use the Data List to check if the master switch is functioning properly. Master Switch
OK: The Techstream display changes normally when master switch is operated.
|
Toyota Tundra Service Manual > Cruise Control System: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the ECM, refer to Registration. Click here HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area ...