Toyota Tundra Service Manual: CD Sound Skips

Toyota Tundra Service Manual / Audio, Visual, Telematics / Navigation / Multi Info Display / Navigation System / CD Sound Skips

PROCEDURE

1.	CHECK DISC

(a) Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.

CHANGE DISC

2.	CHECK DISC

(a) Disc cleaning

(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.

END (DISC IS DIRTY)

3.	REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

END (DISC IS DEFECTIVE)

4.	CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Check that the navigation receiver assembly is properly installed

Result

Result	Proceed to
OK (for Column Shift Type)	A
OK (for Floor Shift Type)	B
NG (for Column Shift Type)	C
NG (for Floor Shift Type)	D

REPLACE NAVIGATION RECEIVER ASSEMBLY

REINSTALL NAVIGATION RECEIVER ASSEMBLY

See More:

Toyota Tundra Service Manual > Headlight Assembly(for Led Headlight): Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY 2. REMOVE FRONT END PANEL LH 3. REMOVE HEADLIGHT ASSEMBLY LH (a) Apply protective tape around the headlight assembly L ...

Toyota Tundra Service Manual: CD Sound Skips

Black Screen

Cellular Phone Inspection

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual