Toyota Tundra Service Manual: Cellular Phone Inspection

CAUTION / NOTICE / HINT

HINT:

If the operation of a cellular phone or the navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

PROCEDURE

1.

CHECK USAGE CONDITION

(a) Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

  • The cellular phone is "Bluetooth" compatible (See page ).
  • The cellular phone is registered as a hands-free device.
  • "Bluetooth" setting of the cellular phone is on.
  • Operating system and software of the cellular phone are the latest versions.
  • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

OK:

The cellular phone is connected correctly.

OK

END (USAGE CONDITIONS DEFECTIVE)

NG

2.

RESTART CELLULAR PHONE

(a) Restart the cellular phone.

(b) Turn the ignition switch off.

(c) Turn the ignition switch to ACC.

(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

OK:

The cellular phone is connected correctly.

OK

END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)

NG

3.

CHECK OPERATION

(a) Check if the in-vehicle device can be recognized by the cellular phone.

OK:

In-vehicle device can be recognized

NG

GO TO STEP 5

OK

4.

REGISTRATION AGAIN

(a) Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.

(b) Register the cellular phone again.

(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

OK:

The cellular phone is connected correctly.

OK

END (TEMPORARY MALFUNCTION WITH "Bluetooth")

NG

5.

CHECK USING ANOTHER VEHICLE

(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

HINT:

  • Make sure to obtain the customer's permission to perform this procedure.
  • After the inspection, clear the registered information and usage history acquired during the inspection.

OK:

The cellular phone is connected correctly.

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

6.

CHECK USING ANOTHER CELLULAR PHONE

(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.

HINT:

  • Make sure to obtain the customer's permission to perform this procedure.
  • After the inspection, clear the registered information and usage history acquired during the inspection.

OK:

The cellular phone is connected correctly.

OK

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    CD Sound Skips

    Cellular Phone Registration Failure

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Short to GND in Outer Mirror Indicator(Slave) (C1AB3)
    DESCRIPTION This DTC is stored when the blind spot monitor sensor LH detects a short to ground in the outer rear view mirror indicator LH. DTC No. DTC Detection Condition Trouble Area C1AB3 Both of the following conditions are met: The blind spot monitor system is on The current that is sent from th ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0104